7360A

SAM™ Studio Subwoofer

Der 7360A ist sowohl für Stereo- als auch für Mehrkanalton geeignet und passt sich intelligent an Ihren Raum an, um absolute Genauigkeit im Tiefbassbereich zu liefern.

Aktive Frequenzweichen

Bass Management


SPL

109 dB

Frequenzgang

19 Hz - 150 Hz (-6 dB)

Abmessungen

H 527 x W 462 x D 363 mm, (Anzeige in Inch)

Definition und Neutralität

Der kompakte 7360A nutzt unsere Laminar-Spiral-Gehäusetechnologie und liefert einen erstaunlichen Schalldruck von 109 dB bei unglaublich geringen Verzerrungen - für eine saubere, präzise und artikulierte Tiefbass-Leistung bis hinunter zu 19 Hz. Der 7360A ist das ideale Werkzeug zum Abhören von Tiefbässen für kleine bis mittelgroße Studios, Post- und Broadcast-Einrichtungen und Ü-Wagen. Er gewährleistet die Definition und Neutralität, der Sie vertrauen können.

Optimiertes Abhören

Der 7360A bietet außerdem ein integriertes Bassmanagement und Mehrkanal-Anschlussmöglichkeiten und kann mit unserer GLM-Software konfiguriert und kalibriert werden. GLM analysiert Ihre Raumakustik und passt Frequenzgang, Pegel, Laufzeit und Phasenlage auf intelligente Weise an - damit Monitore und Subwoofer perfekt aufeinander abgestimmt sind. Dieser Prozess führt zu einem optimierten Hörerlebnis und liefert Mischungen, die sich hervorragend übersetzen.

Genelec

7360A SAM™ Studio Subwoofer

Farboptionen
Lieferumfang:

1 x 7360A Subwoofer
1 x Stromkabel 1,8 m
1 x RJ45 Kabel 5 m
1 x Betriebsanleitung

Genelec

7360A SAM™ Studio Subwoofer

Farboptionen

Technische Spezifikationen

SPL

109 dB

Verstärkerleistung

300 W Bass (Class D)

Frequenzgang

19 Hz - 150 Hz ("-6 dB")

Genauigkeit des Frequenzgangs

± 3 dB (19 Hz - 100 Hz)

Treiberabmessungen

250 mm Bass (Anzeige in Inch)

Abmessungen

H 527 x W 462 x D 363 mm, (Anzeige in Inch)

Gewicht

27 kg / 59.5 lb

Anschlüsse

8 x XLR Analog Input

8 x XLR Analog Output

1 x XLR AES/EBU Input

1 x XLR AES/EBU Output

2 x RJ45 Control

1 x XLR Analog Input

1 x XLR Analog Output

Schlüsseltechnologien

Aktive Frequenzweichen

Bass Management

Intelligent Signal Sensing (ISS™)-Technologie

Laminar Spiral Enclosure (LSE™)-Technology

Optimierte Verstärker

Schutzschaltungen

Smart Active Monitor (SAM™)-Systeme


Referenzen

Using GLM | Walkthrough

Using GLM | The foundations

Using GLM | Controlling GLM with MIDI

Using GLM | GRADE Room Acoustic Report

Using GLM | Calibration Group IDs

Using GLM | Accounts and product registration

Using GLM | The technical details


Händler finden

Geben Sie Ihre Stadt ein, um den nächst gelegenen Händler anzuzeigen.

Filters
X Filters
All
Studiomonitore
Home Audio Lautsprecher
AV Installationslautsprecher
Technischer Service
Showroom
Experience Centre
SAM Certified
Smart IP Certified
Land

Dokumentation

FAQ

The Classic 8000 Series monitors have an analogue input. The 7200 Series SAM subwoofers have AES/EBU digital outputs only. However, other 7300 Series SAM subwoofers have analogue inputs and outputs and can be used also with analogue monitors.

Which SAM™ Products You Are Going to Mix With the Classic 8000 Series?
Mixing 8000 Series and SAM™ monitors is not recommended

We do not recommend mixing Classic 8000 Series monitors with SAM™ Monitors.
If the analogue input sensitivity of 8000 Series and SAM™ Series monitors are the same, Genelec SAM™ Monitors exhibit a slightly larger latency (< 5 ms) than 8000 Series monitors. Therefore Classic 8000 Series and SAM™ Series monitors should not be mixed in a stereo pair or multichannel setup.

It is alright to mix Classic 8000 Series with SAM™ Subwoofers

However, it is okay to mix the Classic 8000 Series monitors with SAM™ Subwoofers. Any Classic 8000 Series monitors can be used with SAM™ Subwoofers, in any stereo or multichannel setup.

Setting the room response calibration controls

Genelec monitors are calibrated flat in anechoic free field conditions. When the monitor is placed in a room close to walls or other boundaries, the low frequency output of the monitor increases. To achieve a flat low frequency response an adjustment of typically -4 dB on the bass tilt control is used. Genelec also provides a bass roll-off control to compensate for any remaining excessive LF energy around the low cut-off frequency.
Genelec GLM AutoCal can implement a more precise compensation after measuring the acoustic effects produced by the monitor’s installation location.

Differences in room reverberation time and listening distance can lead to changes being required in the treble region so treble tilt is fitted to most of the models in the Genelec range.

In three-way monitors and large main systems there are additional driver controls for the bass level, mid level and treble level which enable very fine adjustment of the frequency response so that the monitors can be placed in many different listening environments, whilst still achieving a consistent and neutral sound reproduction.

The best way to set the room response controls of a Genelec monitor is by taking an acoustical measurement at the listening location, using a measurement system for those products that offer local controls (DIP switches) on the monitor or subwoofer, or by using GLM AutoCal for the SAM™ (Smart Active Monitoring) products.

hello

Haben Sie Fragen?


In unserem Support-Portal finden Sie Antworten auf häufig gestellte Fragen:

Hier können Sie unser Support-Team direkt kontaktieren.